[ Up ] [ Steam Turbines ] [ Reciprocating Engines ] [ Gas Turbines ] [ General Differences ] [ Energy FAQ's ]
|
click
for details >> |
Item
A |
Item
B |
Item
C |
Item
D |
Item
E |
Item
F |
Item
G |
|
Nominal
Capacity |
mW |
2.3 |
1.8 |
5.5 |
4.0 |
2.8 |
1.9 |
1.8 |
|
Number
Available |
Quantity |
0 |
3 |
3 |
5 |
1 |
19 |
2 |
|
Total
Capacity |
mW |
18.4 |
5.4 |
17.5 |
20 |
2.8 |
36.1 |
3.6 |
|
Fuel |
literal |
nat
gas |
nat
gas |
nat
gas/diesel |
nat
gas/diesel |
diesel |
nat.
gas or methane |
nat
gas |
|
Heat
Rate |
Btu/kWh |
9000 |
9000 |
8015 |
9400 |
|
8238 |
9000 |
|
Efficiency,
simple cycle |
% |
40% |
40% |
45% |
38% |
41%
|
41% |
41% |
|
Electrical
switchgear,
transformers, etc |
extra
as needed |
|
Time
from order to arrival of
GenSets |
weeks |
10 |
6 |
10 |
10 |
2 |
8 |
2 |
|
Time
for arrival of emission
controls |
weeks |
10 |
10 |
10 |
10 |
0 |
9 |
9 |
|
Operating
Time |
years |
1.5 |
4.0 |
8.6 |
0.5 |
0.0 |
0-0.5 |
0.0 |
|
Original
Life Expectancy |
years |
28.5 |
28.5 |
28.5 |
28.5 |
28.5 |
28.5 |
28.5 |
|
Additional
Features |
|
|
|
150#
steam generators |
95%
gas 5% diesel |
Heat
Recovery |
|
Item A
(top of page)
(sold) 2.4 mW Gas Reciprocating-Engine Power
Generation Plant, each consisting of:
- (1) Cooper Superior V-16 Engine
Model 2416G
- 1200 RPM, 3200 BHP
- Oil Lubrication 159
Gallons-"Clean
Burn"™
Technology, for
low emissions
- Starting System
- Governor +/- 0.25%
- 6800 BTU/BHP hr
- 7860 SCFM Air Flow
- 45-50 PSI Gas Supply
req'd
- (1) Generator 2750k Va
- Brushless, sync, 60
Hz
- 1200 RPM, 0.8 PF
- Class H Insulation,
13800 Volts
- Voltage Regulation
+/- 0.5%
- (1) Control Panel
- Generator Mounted
- Microprocessor
Engine
Controller
- Safety Shutdown
Protection
- Safety Alarm &
LED's
1998 Construction, low hours
Item B
(top of page)
(3) 1.8 mW Gas Reciprocating-Engine Power
Generation Plant, each consisting of:
- (1) Cooper Superior V-12 Engine
- 1200 RPM, 2541 BHP
- Oil Lubrication 119
gallons
- 24v Starter w/
Alternator
- 6800 BTU/BHP hr
- 6151 SCFM Air Flow
- 45-50 PSI Gas Supply
req'd
- (1) Generator 1800 kW
- Brushless, sync, 60
Hz
- 1200 RPM, 4160 Volts
- Class F
Insulation.
0.8 PF
- (1) Control Panel
- Generator Mounted
- Microprocessor
Engine
Controller
- Safety Shutdown
Protection
- Safety Alarm &
LED's
1986 Construction
Stored until 1993
Operated until 1997
Item C
(top of page)
(1) 17.5 mW Dual Fuel Power Generation Plant
Complete including:
- (3) Wartsila Model 18V32GD
- 720 RPM, 4 cycle,
5.432 mW
- 95% Nat. Gas, 5%
Diesel
- (3) Generators, Brushless, sync
- 720 RPM, 60 Hz, 0.8
PF
- Class F Insulation,
4160 Volts
- (3) Control Panels
- (3) Heat Recovery Steam Generators
- 150 PSIG, 6500 lb/hr
each
- (1) Steam Turbine Generator
- (1) Condenser
- 20,000 lb/hr steam
2.5" Hg
- (3) Natural Gas Compressors
Heat rate 8015 BTU/kW-Hr
Good Condition: Total hours 53,783, 77,587,
80,474 and 3250, 2100, 9200 hrs since overhaul;
low emissions.
Item D
(top of page)
This alternative offers the following
features:
- Dual Fuel either Diesel Operation 20
mW, or
- Future Gas operation on 19 mW plus 1
mW diesel.
- Fast delivery 8-12 weeks.
- Proven equipment, no risk.
- Delivery to rail spur.
(5) 4.0 mW dual fuel Reciprocating Engine
Power Generation Plant, each consisting of:
- (1) Cooper KSV-16 Engine
- 600 RPM, 4 cycle
- Dual Fuel (Gas +
Diesel)
- BTU/BHP-Hr Gas
- Gas
6065
+
Oil
460
- 6525
BTU/BHP-Hr
total
- BTU/BHP-Hr Diesel
- 5725 HP at 100% load
- (1) Generator Ideal Electric
- Brushless, sync, 60
Hz
- 600 RPM, 4160 Volts
- 60 Hz, 0.8 PF, 5000
kVA
- (1) PLC Each Unit
Standby total hours used since new: 4043,
3746, 3415, 4239, 3710
Item E
(top of page)
(1) 2.8 Diesel Reciprocating-Engine power
generation plant, each consisting of:
- (1) Electromotive Diesel (EMD)
- 900 RPM
- 4 cycle
- Starting system
- (1) Generator
- 2800 KW output
- 60 Hz 4160 volts
- (1) Control system
- Skid mounted
Built to nuclear specs, 1980's surplus,
unused, zero hours. Maintenance by
manufacturer, inspected annually. Seals
replaced year 2000.
Item F
(top of page)
(19) 1.9 mW Gas Reciprocating-Engine power
generator plants, each including:
- (1) Jenbacher model 616 GS-NL engine
- 1500 RPM, 2575 HP
- 5959 BTU/BHP-hr
- 6325 SCFM
- (1) Generator
- 1912 mW output
- 1800 rpm
- Brushless, 13,800
volt output
- voltage regulator
+/- 0.5%
- (1) Speed Increaser
- 1500 RPM Input, 1800
RPM output
- Falk parallel shaft
type A, or equal
- new
- (1) Control panel
- Microprocessor or
engine
controller
- Safety shutdown
protection
- Safety alarms
- (1) Heat Recovery (9 of the 19
units)
1997-8 construction, some never put into
operation, surplus; none over 5000 hours.
Item
G
(top
of page)
(2) 1.8 mW Gas Reciprocating-Engine power
generator plants, each including:
- (1) GE-Jenbacher model J 612 GS-E12 engine
- 1500 RPM, 2477 HP
- 5948 BTU/BHP-hr
- 6320 SCFM
- Unused surplus
- (1) Generator
- 1790 kW output
- 1800 rpm, 60 Hz
- Brushless, 480
volt output
- voltage regulator
+/- 0.5%
- Unused Surplus
- (1) Speed Increaser (Gearbox)
- 1500 RPM Input, 1800
RPM output
- Parallel shaft
- Unused Surplus
- (1) Control panel (Shared for two
GenSets)
- Microprocessor or
engine
controller
- Safety shutdown
protection
- Safety alarms
- (1) Heat Exchanger to Cooling Tower
use
2008 construction, never assembled or put into
operation, surplus, still on factory skids, 0.00
hours.
|
